Ten Commandment Tablets

I received this request a couple of days ago andNow comes the hard part!
thought I would share my reply:Craft store sell letters and numbers. You will have to
Del,get all the letters, etc you will need.
Can you tell me the best way to make a rubberNow go online and look up how Linotype is set. You
stamp to make concrete Tenwill have to set your letters into the words you
Commandment tablets? Or do you already have onewant. This is done backwards so it is read right to
I could purchase?left. I forget what they call it but you can read it
We are a non-profit organization so I don't want towith a mirror.
spend too much for them.I think I would put them on a sheet of fairly rigid
YBICplastic. You will need to glue them so they don't
Bill Hutson; Foundermove.
Table Talk Foundation for Better Living Inc.Place the finished commandment into the bottom of
I wish I could say I have some made, but no I don'tthe form. Do all this setting up in a place that is not
Bill.going to get direct sunshine all day. Shade is best for
Making one on your own would be a nice littlecuring the stones.
project. I think I would get my forms made first inPaint on a light coat of 10 w. engine oil and pour your
the size I wanted. I would probably use the rigid pinkconcrete into the form.
or blue foam that is used for insulation in houses.For concrete I would use 'topping Mix' you can get it
Sometimes you can pick up a couple of pieces ofat just about any building supply as a 'ready mix'. You
foam and some plastic at construction sites if youjust add water. I would mix it thinner that the
talk nice. You should get at least 1 1/2 or 2 inchesinstructions on the bag. Make it about like pancake
thick, with 2 inches probably best, but sometimes amix. You want to POUR it. Start in one place and let
little hard to find.the concrete spread itself as much as you can. You
I would carve out the shape of the tablet. Cut rightmay have to move a little if it gets to the top of the
through so you have a hole shaped like a headstoneform and another area is not covered yet.
or whatever shape you have in mind.Do not move your bucket all over the place when
Line this with plastic. I would use a garbage bag cutyou are pouring. You will have all kinds of air bubbles
so it was a flat sheet. Another thing that works wellif you do this.
is that plastic that is put on interior walls before theNow the real hard part...
sheetrock that you got when you asked for theCover with plastic and wait at least 48 hours, better
surplus insulation at the building site.yet, 3 days and pray!